think of cctv? think of Guardtech


Transmission & Power

Items 1 to 20 of 40 total

per page
Page:
  1. 1
  2. 2
  3. Next

View as: List  Grid 

Set Descending Direction
  1. Call us for best price @ +6016 666 1221

    NET5400T

    RM 0.00


    Dual Stream Encoder, Video Analytics Processor - NET5400T Series - Intelligent Video Encoder

    • Open Standards-Based Architecture
    • H.264 Baseline, Main, or High Profile Compression
    • Dual-Stream at up to 4CIF, 30/25 Images per Second (ips) per Stream
    • Integrated Video Content Analysis on Designated Models
    • Integrated Multi-Zone Video Motion Detection
    • Integrated Audio, Alarm, and Relay Inputs and Outputs
    • Integrated Coaxitron® and Pelco D PTZ Protocols
    • Power over Ethernet (PoE) Models (Compliant with IEEE 802.3af or IEEE 802.3at)
    • Support for 2 Unicast Streams per Channel
    • Support for Multicast Transmission
    • 1-, 2-, and 4-Channel Models Learn More
  2. Call us for best price @ +6016 666 1221

    NET5402R-HD

    RM 0.00


    Multi-Stream Video Decoding Unit - NET5402R-HD - HD Network Video Decoder

    • Decode Standard Resolution and Megapixel Resolution Streams
    • Simultaneously Drive Two High Definition Monitors From a Single Unit
    • Support for MPEG-4, H.264 Baseline, Main, and High Profile Codecs
    • Simultaneously View up to Sixteen MPEG-4 Streams at 4CIF Resolution, 30/25 Images Per Second (ips); up to Twelve H.264 Streams at 4CIF Resolution, 30/25 ips; or up to Two 1080P Streams in Real Time
    • EnduraView™ Technology Optimizes CPU Load and Bandwidth Utilization when Displaying Multiple Cameras Simultaneously
    • Maintains Aspect Ratio of Original Stream
    • Supports Monitor-Wall Configurations When Used in Conjunction with an Endura® VCD5202
    • Supports Alarm/Spot Monitor Capability, Including Sequencing, When Programmed with Endura Scripts
    • Supports User-Specified Language Choices for User Interface Display Learn More
  3. Call us for best price @ +6016 666 1221

    RK5200PS-5U

    RM 0.00


    Video Encoder Module Chassis Rack Mount - RK5200PS-5U - Rack Mount for Video Encoders

    • Mounts in Standard 19-inch (48.26 cm) Rack
    • Hot-Swappable Internal Power Supplies
    • Thermal Management Included
    • Optional Blank Modules
    • Integrates with Pelco Endura® Modules
    • 5 Rack Units (RU) High Learn More
  4. Call us for best price @ +6016 666 1221

    FTD4/FRD4

    RM 0.00


    4 Channel Bi-Directional Data Transmitter, Receiver - FTD4/FRD4

    • 4 Bidirectional Data Channels Support RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
    • Multimode Fiber Support for Distances up to 3 km (1.9 mi)
    • Single-Mode Support for Distances up to 69 km (42.9 mi)
    • Laser Diode for Transmission of Optical Signals
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • Hot-Swappable Rack Modules
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  5. Call us for best price @ +6016 666 1221

    FTD1/FRD1

    RM 0.00


    Single Channel Bi-Directional Data Transmitter, Receiver - FTD1/FRD1

    • Bidirectional Data Channel That Supports EIA RS-232C/D, RS-422/RS-485 (2-wire/4-wire) with Tri-State, Manchester, and Bi-Phase Communication
    • Multimode Fiber Support for Distances up to 4 km (2.5 mi)
    • Single-Mode Support for Distances up to 69 km (42.9 mi)
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Laser Diode for Transmission of Optical Signals
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Hot-Swappable Rack Modules
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  6. Call us for best price @ +6016 666 1221

    FTV40/FRV40

    RM 0.00


    4 Channel Video Transmitter, Receiver - FTV40/FRV40

    • 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
    • Multimode Fiber Support for Distances up to 2 km (1.2 mi)
    • Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)
    • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
    • Laser Diode for Transmission of Optical Signals
    • Compatible with NTSC, PAL, or SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  7. Call us for best price @ +6016 666 1221

    FTV160/FRV160, FTV320/FRV320 Fiber Transmitter and Receiver

    RM 0.00


    16- or 32- Channel Digitally Encoded Video - FTV160/FRV160, FTV320/FRV320 Fiber Transmitter and Receiver

    • 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
    • Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
    • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
    • Compatible with NTSC, PAL, or SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Laser Diode for Transmission of Optical Signals
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Rack-Mountable Modular Design Learn More
  8. Call us for best price @ +6016 666 1221

    FTV80/FRV80

    RM 0.00


    8 Channel Video Transmitter, Receiver - FTV80/FRV80

    • 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
    • Multimode Fiber Support for Distances up to 3 km (1.9 mi)
    • Single-Mode Fiber Support for Distances up to 48 km (29.8 mi)
    • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
    • Compatible with NTSC, PAL, or SECAM Video Standards
    • Meets NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Laser Diode for Transmission of Optical Signals
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  9. Call us for best price @ +6016 666 1221

    FTV10

    RM 0.00


    Single Channel Digitally Encoded Video - FTV10

    • 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
    • Multimode Fiber Support for Distances up to 4 km (2.5 mi)
    • Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
    • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
    • Laser Diode for Transmission of Optical Signals
    • Compatible with NTSC, PAL, or SECAM Video Standards
    • Designed to meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  10. Call us for best price @ +6016 666 1221

    FRV20

    RM 0.00


    2 Channel Video Receiver - FRV20

    • Accepts Two 10-Bit Digitally Encoded Video Channels over Two Fibers
    • Compatible with FTV10 and FTV10M Fiber Transmitters
    • Multimode Fiber Support for Distances up to 3 km (1.9 mi)
    • Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)
    • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
    • Compatible with NTSC, PAL, or SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  11. Call us for best price @ +6016 666 1221

    FT8301A/FR8301A

    RM 0.00


    Single Channel Video Transmitter, Receiver - FT8301A/FR8301A - Single-channel Fiber Transmitter and Receiver

    • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
    • Multimode Fiber Support for Distances up to 6 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • Designed to meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply
    • Standalone and Rack-Mountable Modular Design
    • LED Indicators for Monitoring of Signal Status, Laser Status, and Operating Power Learn More
  12. Call us for best price @ +6016 666 1221

    FT8301A

    RM 0.00


    Single Channel Miniature Video Transmitter, Receiver - FT8301A - Miniature Single-channel Fiber Transmitter

    • Miniature Module Designed for Use in Pelco® EH2515/EH3512/EH3515 Series Camera Enclosures and in DF5/DF8 Series Fixed Mount Domes or for Use as a Standalone Module
    • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
    • Multimode Fiber Support for Distances up to 6 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply
    • LED Indicators for Monitoring of Signal Status and Laser Status Learn More
  13. Call us for best price @ +6016 666 1221

    FTV80D2/FRV80D2

    RM 0.00


    8 Channel Video, Data Transmitter, Receiver - FTV80D2/FRV80D2

    • 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
    • 2 Bidirectional Data Channels Support RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
    • 1 Bidirectional Contact Closure
    • Multimode Fiber Support for Distances up to 2 km (1.2 mi)
    • Single-Mode Support for Distances up to 69 km (42.9 mi)
    • Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
    • Laser Diode for Transmission of Optical Signals
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Hot-Swappable Rack Modules
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  14. Call us for best price @ +6016 666 1221

    FTV40D2/FRV40D2

    RM 0.00


    4 Channel Bi-Directional Video, Data Transmitter, Receiver - FTV40D2/FRV40D2

    • 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
    • 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
    • 1 Bidirectional Contact Closure
    • Multimode Fiber Support for Distances up to 2 km (1.2 mi)
    • Single-Mode Support for Distances up to 69 km (42.9 mi)
    • Exceeds All Requirements for the RS-250C Short-Haul Transmission Specification
    • Laser Diode for Transmission of Optical Signals
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters
    • Hot-Swappable Rack Modules
    • Stand-Alone or Rack-Mountable Modular Design Learn More
  15. Call us for best price @ +6016 666 1221

    FS85011A

    RM 0.00


    Single Channel Bidirectional Video, Data Transmitter - FS85011A - Single-channel Fiber Transmitter

    • Designed for Use in Spectra III™ and Spectra® IV Domes and in the ExSite® Explosion Proof Positioning System
    • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
    • Bidirectional RS-422 Data Channel or Coaxitron® Communication
    • Patent-Pending Transmission Technology Allowing for Coaxitron Control at Full-Distance Capabilities
    • Compatible with the FR85011A/FR85011 Fiber Receiver
    • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
    • Multimode Fiber Support for Distances up to 6 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • No Performance Adjustments Required
    • LED Indicator for Monitoring of Signal Status
    • Laser Diode for Transmission of Optical Signals Learn More
  16. Call us for best price @ +6016 666 1221

    FT85011A/FR85011A

    RM 0.00


    Single Channel Video, Data Transmitter, Receiver - FT85011A/FR85011A - Single-channel Fiber Transmitter and Receiver

    • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
    • Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron® Communication
    • Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
    • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
    • Multimode Fiber Support for Distances up to 6 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
    • Compatible with NTSC, PAL, and SECAM Video Standards
    • Meets NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply Learn More
  17. Call us for best price @ +6016 666 1221

    FTV10D1A2/FRV10D1A2

    RM 0.00

    Out of stock


    Video with Bi-Directional Data, Audio and Contact Closure - FTV10D1A2/FRV10D1A2

    • 10-Bit Digitally Encoded Bidirectional Video for High-Quality Transmission over a Single Fiber
    • 1 Bidirectional Data Channel Supports RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
    • 2 Bidirectional 24-Bit (96 kHz) Digitally Encoded Audio Channels with 600-Ohm Balanced Line-Level Audio (up to +6 dBm) and 20 to 18 kHz Audio Bandwidth
    • 1 Bidirectional Contact Closure
    • Multimode Fiber Support for Distances up to 4 km (2.5 mi)
    • Single-Mode Support for Distances up to 48 km (29.8 mi)
    • Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
    • Laser Diode for Transmission of Optical Signals
    • Compatible NTSC, PAL, and SECAM Video Standards
    • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • Voltage Transient Protection on All Power and Signal Input/Output Lines
    • LED Status Indicators for Monitoring All Critical Operating Parameters Learn More
  18. Call us for best price @ +6016 666 1221

    FT82041/FR82041

    RM 0.00


    4 Port, 10Base-T/100Base-TX Unmanaged Ethernet Switch - FT82041/FR82041 - Fiber Optic Ethernet Switch

    • Unmanaged Ethernet Switch for the Transport of Bidirectional Ethernet Data:
    Four 10BASE-T/100BASE-TX Ports
    One 100BASE-FX Port
    • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
    • Designed for Point-to-Point Applications
    • User-Selectable Networking Functions for Each 10BASE-T/ 100BASE-TX Port:
    Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex
    Modes
    10 Mbps or 100 Mbps Selectable
    Full-Duplex or Half-Duplex Mode Selectable
    Enabling/Disabling of Flow Control
    • Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
    • Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
    • Multimode Fiber Support for Distances up to 2 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Laser Diode for Transmission of Optical Signals
    • Environmentally Hardened
    • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply
    • Stand-Alone and Rack-Mountable Modular Design
    • LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI),10BASE-T/100BASE-TX Port Status, and Operating Power Learn More
  19. Call us for best price @ +6016 666 1221

    FX82012

    RM 0.00


    Single Port, 10Base-T/100Base-TX Unmanged Ethernet Switch - FX82012 - Fiber Optic Ethernet Switch

    • Unmanaged Ethernet Switch for the Transport of Bidirectional Ethernet Data:
    One 10BASE-T/100BASE-TX Port
    Two 100BASE-FX Ports
    • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
    • Designed for Point-to-Point Applications with Fiber Redundancy Option and for Drop-and-Repeat Applications
    • User-Selectable 10BASE-T/100BASE-TX Networking Functions:
    Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex
    Modes
    10 Mbps or 100 Mbps Selectable
    Full-Duplex or Half-Duplex Mode Selectable
    Enabling/Disabling of Flow Control
    • Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
    • Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
    • Multimode Fiber Support for Distances up to 2 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Laser Diode for Transmission of Optical Signals
    • Environmentally Hardened
    • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply
    • Stand-Alone and Rack-Mountable Modular Design
    • LED Indicators for Monitoring of Fiber Redundancy Mode Status, Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power Learn More
  20. Call us for best price @ +6016 666 1221

    FX82051

    RM 0.00


    5 Port, 10Base-T/100Base-TX and Single Port 100Base-FX Unmanaged Ethernet Switch - FX82051 - Fiber Optic Ethernet Switch

    Features:
    • Unmanaged Ethernet Switch for the Transport of Bidirectional
    Ethernet Data:
    Five 10BASE-T/100BASE-TX Ports
    One 100BASE-FX Port That Accepts 2 Fibers
    • Compatibility with Third-Party 100BASE-FX Ethernet Equipment (Multimode ST and SC Models Only)
    • Designed for Point-to-Point Applications
    • User-Selectable Networking Functions for Each 10BASE-T/
    100BASE-TX Port:
    Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex
    Modes
    10 Mbps or 100 Mbps Selectable
    Full-Duplex or Half-Duplex Mode Selectable
    Enabling/Disabling of Flow Control
    • Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
    • Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
    • Multimode Fiber Support for Distances up to 6 km
    • Single-Mode Fiber Support for Distances up to 46 km
    • Laser Diode for Transmission of Optical Signals
    • Environmentally Hardened
    • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
    • No Performance Adjustments Required
    • 12 VDC or 24 VAC Power Supply
    • Stand-Alone and Rack-Mountable Modular Design
    • LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power Learn More

Items 1 to 20 of 40 total

per page
Page:
  1. 1
  2. 2
  3. Next

View as: List  Grid 

Set Descending Direction